My little crucible is sitting too low in the furnace. It needs a taller plinth to raise it up.
I used an old crucible as a form and placed it in a paper bucket. I put a pvc tube inside the crucible to keep refractory mix
out of it. The refractory was poured into the space between the crucible and bucket.
The pvc tube removed.
Here's the finished plinth...slightly used.
<Next - Test Fire>
Top of Page
Hand Crafted, Sand Cast Bronze and Aluminum
Gifts, Buckles, Medallions, Original Art, Reproductions,
Trailer Hitch Inserts and Custom Designs